Product Summary


The VenVac is a vacuum device that utilizes the Venturi principle to attach vacuum electrodes to a patient. The Venturi principle creates vacuum pressure by blowing air and thereby improves safety and functionality. Safety is improved because water storage is eliminated and the electrodes easily sterilized. Functionality is improved because, if one electrode becomes detached, suction is maintained and the remaining electrodes do not fall off.

The venture electrodes can be quickly and easily attached and adapt comfortably to the contours of the body – even on difficult areas like the shoulder. Good contact with the skin is thus ensured and the applied suction will help to increase blood circulation.

Four electrodes can be attached to the body and permit the full range of stimulatory treatments, provided by the ET-3000 to be applied using the Venturi system. The suction power is controlled by the therapist and can be applied continuously or intermittently. Rubber electrodes can also be used simultaneously.

The VenVac comes complete with 4 Venturi electrodes, sponges and venture leads.

The VenVac was designed for use with the ET-3000 but can also be used in conjunction with stimulation equipment from other manufacturers.


• Vacuum output on each of 4 outlets
• Vacuum output can be adjusted to between 0.06 and 0.12 bar
• Vacuum pulse can be adjusted from 0.5 seconds ‘time-on’ per 10 second cycle
• Continuous, pulse and 3-step pulse output options

Technical Specifications:

Unit Size

270 x 342 x 120mm


7 kilograms


I type BF IEC 601-1


AC 110-240V, 50/60 Hz

2A/250V x 2 slow blow

Operating current draw

0.8 Amps at 240VAC 50 Hz
Operating temperature

0 to +40 degrees C

Storage temperature -20 degrees to +60 degrees C

Back To Products Page